Type HD, KT Industrial & TKF Flameproof Thrustors

 

(Pic) TKF Thrustor
(Features) KT & TKF Thrustors
  • The KT Thrustor is operated by a standard D63 or D71 cage induction motor fitted with a cast iron frame and steel terminal box. The standard version is CSA approved, and a modified version is available for DIP applications. The TKF Flameproof Thrustor has an integral stator/rotor unit in a flameproof enclosure certified to BS229 for Group 1 & 2 gases, and all frame sizes are CSA approved for use in hazardous areas.
(Pic) KT Thrustor



Model Type HD 25/5 75/5 125/6 200/12
Rated Force (without internal spring) N
kgf
245
25
735
75
1225
125
1960
200
Stroke mm
50 50 60 120
Return Force (springs fitted) N
kgf
230
23.5
686
70
1167
119
1795
183
Operating Rate (max.) ops/min
33 33 33 13
Motor Power kW
0.125 0.25 0.75 0.75
Input Current A @ 220/240V
A @ 380/415V
0.7
0.4
1.1
0.65
3.1
1.8
3.1
1.8
Mass (without oil) kg
16 23 50 65
Length Between Mounting Centers mm
335 435 575 695


Industrial Types KT402-6505

Type KT402

Types KT752-6505

Operating position of thrustor must always be within 10 of the vertical with top uppermost.

Pin joints should be used at top and bottom to connect thrustor to load so that side pressure (which may cause binding) is avoided.

Supply cable must be flexible and allow thrustor to pivot

Type KT402 cable entry
Terminal box can be turned through 180 with cable inlet facing the opposite way to that shown

Types KT752-6505 cable entry
Terminal box can be arranged to give any one of four directions of cable entry at 90 intervals.

Metric Units
  Dimensions in millimetres
Type A B C D E F G H J K L
Max Min
KT402 349 51 - 92 - 159 19 26 13 12,731 12,725 19
KT752/1002 445 51 203 102 71 171 22 29 14 19,13 19,08 14
KT1503/2503 508 76 243 122 71 216 25 32 16 22,30 22,25 25
KT5005/6505 660 127 289 145 86 254 32 38 19 25,48 25,43 29

Type M

 

N

 

P Q R S T Oil
capacity
Litres
Mass (kg) Approx capacity of case m3
Without oil With oil
KT402 16 19 41 19 95 275 120 2 12,5 14 0,071
KT752/1002 21 27 41 25 95 340 120 2,5 21 23 0,071
KT1503/2503 24 29 48 32 95 330 120 4,5 33 37 0,10
KT5005/6505 27 43 54 38 95 465 120 9 50 58 0,15

Imperial Units
  Dimensions in inches
Type A B C D E F G H
KT402 13 3/4 2 - 3 5/8 - 6 1/4 3/4 1
KT752/1002 17 1/2 2 8 4 2 25/32 6 3/4 7/8 1 1/8
KT1503/2503 20 3 9 9/16 4 25/32 2 25/32 8 1/2 1 1 1/4
KT5005/6505 26 5 11 3/8 5 11/16 3 3/8 10 1 1/4 1 1/2

Metric Units
  Dimensions in millimetres
Type J K L M N P Q
Max Min
KT402 1/2 0,503 0,501 3/4 5/8 3/4 1 39/64 3/4
KT752/1002 9/16 0,753 0,751 9/16 13/16 1 1/16 1 5/8 1
KT1503/2503 5/8 0,878 0,876 1 15/16 1 5/32 1 7/8 1 1/4
KT5005/6505 3/4 1,003 1,001 1 1/8 1 1/16 1 11/16 2 1/8 1 1/2

Type R S T Oil
capacity
Pints
Weight (lb) Approx 
capacity of case
Without oil With oil
KT402 3 3/4 10 3/4 4 3/4 3 27 30 See
Above
KT752/1002 3 3/4 13 3/8 4 3/4 4 46 50
KT1503/2503 3 3/4 13 4 3/4 8 72 81
KT5005/6505 3 3/4 18 1/4 4 3/4 16 110 128



Copyright 2017 by A.P. Wittwer Co., Inc.
All rights reserved.